Bagaimana menghubungkan Wifi Android ke Adhoc ??

Secara default ANdroid versi <4 tidak bisa terhubung dengan jaringan adhoc windows 7. Perlu pengaturan di windows agar android mengenali jaringan adhoc.

Caranya?

Jalankan DOS command prompt sebagai Administrator ( Run As Administrator) lalu ketik perintah berikut:
1. Membuat jaringan adhoc dan setting password

netsh wlan set hostednetwork mode=allow ssid=SSID key=PASSWORD

2. Start service

netsh wlan start hostednetwork

( sampai tahap ini,  android sudah bisa terhubung ke adhoc )

3. Untuk stop service gunakan perintah berikut:

netsh wlan stop hostednetwork

Done!

kode rahasia android

General Codes:

*#06# – Display’s IMEI number.

*2767*3855# – This code will Format your device to factory state (will delete everything on phone).

*#*#4636#*#* – Display’s Phone information, usage statistics and battery.

*#*#273282*255*663282*#*#* – This code will Immediately backup of all media files.

*#*#197328640#*#* – This code will Enable test mode for service.

*#*#1111#*#* – Will display FTA software version.

*#*#1234#*#* – Will show PDA and firmware version.

*#*#232339#*#* – Wireless LAN tests.

*#*#0842#*#* – This code is used  for Backlight/vibration test.

*#12580*369# – Display’s Software and hardware info.

*#*#2664#*#* – This code is used for Testing the touchscreen.

*#9900# – System dump mode.

*#9090# – Diagnostic configuration.

*#*#34971539#*#* – Will display Detailed camera information.

*#872564# – USB logging control.

*#301279# – HSDPA/HSUPA Control Menu.

*#7465625# – This code will display phone’s lock status.

*#0*# – Enter the service menu on newer phones like Galaxy S III.

*#*#7780#*#* – Reset the /data partition to factory state.

Basic Codes:

*#*#7780#*#*   – This code is used for factory restore setting.This will remove Google account setting and System and application data and settings.

*2767*3855#   –  This code is used for factory format, and will remove all files and settings including the internal memory storage. It will also re install the firmware.

*#*#4636#*#*   – This code show information about your phone and battery.

*#*#273283*255*663282*#*#*    – This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

*#*#197328640#*#*    –  This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

*#*#7594#*#*   –  This code enable your “End call / Power” button into direct power off button without asking for selecting any option(silent mode, aero plane and power-off).

*#*#8255#*#*  –  This code can be used to launch G Talk Service Monitor.

*#*#34971539#*#*    –  This code is used to get camera information. Please avoid update camera firmware option.

W-LAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#*   –  W-LAN test (Use “Menu” button to start various tests).

*#*#232338#*#*    –  Shows WiFi MAC address.

*#*#1472365#*#*    –  GPS test.

*#*#1575#*#*    –  Another GPS test.

*#*#232331#*#*   –  Bluetooth test.

*#*#232337#*#    –  Shows Bluetooth device address.

Codes to launch various Factory Tests:

*#*#0842#*#*   – Device test (Vibration test and BackLight test).

*#*#0588#*#*    – Proximity sensor test.

*#*#0*#*#*    –  LCD test.

*#*#2664#*#*   –  Touch screen test.

*#*#2663#*#*    –  Touch screen version.

*#*#0283#*#*   –  Packet Loopback.

*#*#0673#*#* OR *#*#0289#*#*    –  Melody test.

*#*#3264#*#*    –  RAM version.

Code for firmware version information:

 *#*#1111#*#*   –  FTA SW Version.

*#*#2222#*#*   – FTA HW Version.

*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number.

*#*#4986*2650468#*#*   – PDA, Phone, H/W, RFCallDate.

*#*#1234#*#*  – PDA and Phone.

 

sumber : dailytipsndtricks.blogspot.com/2013/03/secret-codes-for-your-android-mobile.html